MG1000X is our flagship data collector, which can provide measurement and control for various applications. Its reliability and robustness make it an excellent choice for remote environmental applications, including meteorological stations, meso subsystems, wind profiles, air quality monitoring, hydrological systems, water quality monitoring and hydrometeorological stations.
The MG1000X is a low-power device that can measure sensors, drive direct communications and telecommunications, analyze data, control external devices, and store data and programs in on-board nonvolatile memory. The electronic equipment is radio-frequency shielded through a unique sealed stainless steel tank. A battery powered clock ensures accurate timing. All contemporary Campbell Scientific data recorders are common on-board, similar to BASIC programming language, and support data processing and analysis routines.
Features:
It can operate in extreme environments with a standard operating range of - 40 ° to 70 ° C and an extended operating range of - 55 ° to 85 ° C
Connect directly to your computer's USB port
Capture fast changing data values with fast analog measurement (300 Hz)
With higher resolution measurement (24 bit Adc), it can even distinguish
Minor changes in data values
Includes two non isolated current input channels for direct connection to sensors with 0 to 20 mA or 4 to 20 mA current outputs
Includes onboard CPI ports for hosting Campbell high-speed sensors and distributed modules (CDM)
Direct connection to Ethernet
Includes microSD card driver to meet expanded storage requirements
Simple serial sensor integration and measurement via SDI-12, RS-232 and/or RS-485
Supports full PakBus network
Including embedded web pages, which can be directly connected through a web browser
Main performance parameters:
Operating temperature range: - 40 ° to+70 ° C (standard), - 55 ° to+85 ° C (extended) (non condensing environment)
Case material: powder coated aluminum
Analog inputs: 16 single ended or 8 differential (separately configured)
Pulse counter: 10 (P1 to P2 and C1 to C8)
Voltage excitation terminal: 4 (VX1 to VX4)
Communication port: Ethernet; USB Micro B； CS input/output; RS-232； CPI； RS-485
Data storage port: microSD
Switch 12V: 2 terminals
Digital I/O: 8 terminals (C1 to C8) can be configured as digital inputs and outputs. It includes high/low status, pulse width modulation, external interrupt, edge timing, switch closing pulse counting, high-frequency pulse counting, UART, RS-232, RS-485, SDM, SDI-12, I2C and SPI functions. Terminals can be configured in pairs to achieve 5 V or 3.3 V logic for some functions.
Input range: ± 5 V
Analog voltage accuracy: (accuracy specification does not include sensor or measurement noise)
± (0.04% of measured value+offset) at 0 ° to 40 ° C- ± (0.06% of measured value+offset) at 40 ° to+70 ° C- ± (0.08% of measured value+offset) from 55 ° to+85 ° C (extended temperature range)
ADC: 24 bit
Power requirements: 10 to 18 Vdc input
Real time clock accuracy: ± 3 minutes per year (optional GPS correction to ± 10 µ s)
Internet protocols: Ethernet, PPP, CS I/O IP, RNDIS, ICMP/Ping, Automatic IP (APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, SNMPv3, NTP, Telnet, HTTP (S), FTP (S), SMTP/TLS, POP3/TLS
Communication protocols: CPI, PakBus, SDM, SDI-12, Modbus, TCP, DNP3, UDP, NTCIP, NMEA 0183, I2C, SPI, etc
Battery powered SRAM for CPU usage and final storage: 4 MB
Data storage: 4 MB SRAM+72 MB flash memory (Up to 16 GB of storage can be expanded with a removable microSD flash card.)
Standby power consumption (average):<1 mA (@ 12 Vdc)
Operating power consumption (average): 1 mA (1 Hz scan @ 12 Vdc)
55 mA (20 Hz scan @ 12 Vdc)
Dimensions: 23.8 x 10.1 x 6.2 cm (9.4 x 4.0 x 2.4 in)
Weight: 0.86 kg (1.9 lb)